Products · 06 / 08

Glass railing systems

Name: Light Plast Design
Address: Bulevardul Alexandru Obregia 25, București, Sector 4, 041727, RO
Telephone: +40 751 941 941

Post-free balustrades for stairs, balconies and terraces — the Vector, Delta and Soft Line series.

In short

All three series hold the glass in a continuous bottom profile fixed to the slab, with no vertical posts. The difference is that profile's geometry: Vector Line is straight, Delta Line trapezoidal and widened at the base, Soft Line oval. Glass, fixing and rated load are identical.

Vector
Delta
Soft

Comparison · 3 series

The difference is the base profile's geometry

The same laminated glass, the same slab fixing, the same rated load. Only the shape of the profile left visible at the foot of the balustrade changes.

Vector Line
A straight base profile with vertical faces. For projects built on clean, geometric lines.
Profile geometry
Straight, vertical faces
Glass
6.2.6 or 8.2.8, laminated and toughened
Horizontal load
2,1 kN/m — categoria E
Delta Line
A trapezoidal profile, widened at the base. It spreads the load better and adds a geometric accent.
Profile geometry
Trapezoidal, widened at the base
Glass
6.2.6 or 8.2.8, laminated and toughened
Horizontal load
2,1 kN/m — categoria E
Soft Line
An oval profile with rounded lines. For discreet visual integration, with no sharp edges.
Profile geometry
Oval, widened at the base
Glass
6.2.6 or 8.2.8, laminated and toughened
Horizontal load
2,1 kN/m — categoria E

Test values come from the report on the 8.2.8 model, 1500 × 1000 mm panel, fixed directly into concrete. The glass thickness for a given project is set by height, span and local loading.

The series in detail

Straight profile

Vector Line

A base profile with vertical faces and sharp edges, fixed to the slab or to the finished floor. The minimalist geometry continues the drawing of a project built on clean lines, and the setting blocks allow millimetre alignment of the panels.

Profile geometry: Straight, vertical faces
Glass: 6.2.6 or 8.2.8, laminated and toughened
Horizontal load: 2,1 kN/m — categoria E
Impact: Class 5, SR EN 13049
Fixing: To the slab or the finished floor
Vertical posts: None
Profile finish: Anodised or powder-coated

View series

Trapezoidal profile

Delta Line

A trapezoidal profile, wide where it meets the slab and tapering towards the glass. The widened base spreads the load over a larger area, and the inclined face catches light differently from a vertical one, so the profile reads thinner than it is.

Profile geometry: Trapezoidal, widened at the base
Glass: 6.2.6 or 8.2.8, laminated and toughened
Horizontal load: 2,1 kN/m — categoria E
Impact: Class 5, SR EN 13049
Fixing: To the slab or the finished floor
Vertical posts: None
Profile finish: Anodised or powder-coated

View series

Oval profile

Soft Line

An oval profile with rounded lines and the same widened base. It produces no hard reflections and leaves no sharp edge at foot level — the choice for furnished spaces where the balustrade should settle in rather than comment.

Profile geometry: Oval, widened at the base
Glass: 6.2.6 or 8.2.8, laminated and toughened
Horizontal load: 2,1 kN/m — categoria E
Impact: Class 5, SR EN 13049
Fixing: To the slab or the finished floor
Vertical posts: None
Profile finish: Anodised or powder-coated